OFFICIAL SPEC SHEET · HELP CENTER · DATED COMPARISON

What power does Starlink Mini
officially need?

For Starlink’s own USB-C cable, the published minimum is a 100W USB Power Delivery source at 20V/5A. A 65W rating shows up on third-party cable pages. It does not appear as the minimum on Starlink’s Mini specification sheet.

Last verified: 16 November 2026. Quotes below were read from Starlink’s public specification PDFs and rendered Help Center articles on that date. The PDFs and articles do not print their own revision dates.

The short answer

Starlink publishes three different power numbers for Mini, and they answer different questions:

  • USB-C source, official cable: 100W, 20V/5A minimum.
  • Dish input rating: 12–48V DC, 60W.
  • Average power consumption: 25–40W.

The 100W figure is the supply the official USB-C cable is specified to use. It is not a claim that the dish draws 100W in normal use. The 25–40W line is average consumption. The Help Center also says Starlink only guarantees performance with the included power supply and cable.

Official USB-C line, retrieved 16 November 2026

“Use a USB Power Delivery source rated 100 W, 20 V at 5 A. 100 W is the minimum.” Starlink Help Center, What USB power rating do I need to power my Starlink Mini?

Claims side by side

Each row is a published sentence, not a field measurement. “Retrieved” means the page was read on that day. Where a page prints its own update date, that date is listed too.

Source Date What it states Applies to
Starlink Mini specification sheet Retrieved 16 Nov 2026. Sheet undated. USB PD Requirement 100W, 20V/5A Minimum (with Starlink USB-C to Barrel Jack Cable Accessory). Average power consumption 25-40W. Input rating 12-48V 60W. Official Mini specification
Starlink Help Center, USB power rating Retrieved 16 Nov 2026. No revision date on the page. 100 W, 20 V at 5 A is the minimum. Mini will not run on a USB-PD supply rated below 100 W, including 65 W and any supply from 66 W to 99 W. Official USB-C path
Starlink Help Center, Mini USB-C cable Retrieved 16 Nov 2026. No revision date on the page. The 5 m cable requires a 100 W (20 V / 5 A) power source. The power-requirements line repeats “a 100 W, 20 V, 5 A source.” Official 5 m USB-C cable
Starlink Help Center, supported power sources Retrieved 16 Nov 2026. No revision date on the page. Power input rating 12 to 48 V DC, 60 W. Other power: the Mini USB-C cable with a 100 W USB-C supply, or the Mini Car Adapter. Performance is guaranteed only with the included supply and cable. Which sources Starlink stands behind
Starlink Mini accessories guide Retrieved 16 Nov 2026. Guide undated. Mini USB-C cable “Requires a 100W (20V/5A) power source.” Official cable accessory
Eazuse, USB-C power bank guide Updated 16 Oct 2026. Retrieved 16 Nov 2026. For the Eazuse cable: 20V/3.25A, or 65W, is the listed minimum output requirement, up to 20V/5A or 100W. Eazuse recommends a compatible 100W USB-C PD source for the most reliable results. Eazuse’s cable, not the Starlink sheet
Eazuse cable product page Retrieved 16 Nov 2026. No revision date on the page. Spec table: Min. Output Power 65W (20V/3.25A). Max. Output Power 100W (20V/5A). FAQ: the cable requires a PD source of at least 65W (20V/3.25A); 100W (20V/5A) is recommended. That product’s spec table
Daierswitches cable product page Retrieved 16 Nov 2026. No publication date on the page. “The Starlink Mini requires at least 65W (20V/3.25A) for proper operation.” Spec table: Min. Output Power 65W (20V/3.25A), Max. Output Power 100W (20V/5A). The page says the cable does not adjust voltage. That seller’s cable

Verbatim official quotes

Wording is copied from the rendered English Help Center and from the text of the public PDFs. Spacing in the PDF extracts matches the labeled specification lines.

Help Center: USB power rating

Use a USB Power Delivery source rated 100 W, 20 V at 5 A. 100 W is the minimum.

Starlink Mini will not run on a USB Power Delivery supply rated below 100 W. That includes a 65 W supply and any supply from 66 W to 99 W.

The USB-C to barrel jack cable accessory is available in the Starlink Shop. For more details, click here.

Source: starlink.com/us/support/article/fba85643-e7fa-4b55-21e5-021422d5701e. Retrieved 16 November 2026. The same article id on the German Help Center (de-lu) carries the same claims in German, including a 65 W supply and supplies from 66 W to 99 W.

Help Center: Mini USB-C cable

The 5 m (16.4 ft) Mini USB-C cable powers your Starlink Mini from USB-C. It replaces the Mini 15 m (49.2 ft) power cable from the Starlink Mini Kit. It requires a 100 W (20 V / 5 A) power source.

The Starlink Mini USB-C cable requires a 100 W, 20 V, 5 A source.

Source: starlink.com/us/support/article/7c9fb509-e3c4-c6af-b2f5-ef95e645c046. Retrieved 16 November 2026.

Help Center: supported power sources

The Starlink Mini has a power input rating of 12 to 48 V DC, 60 W. Starlink only guarantees performance with the included Starlink power supply and cable.

For other power, use the Starlink Mini USB-C cable with a 100 W USB-C supply, or use the Mini Car Adapter.

See the Starlink Mini Specification Sheet for more information.

Source: starlink.com/us/support/article/0b2d5227-1db6-0002-ecee-f49d3b516b49. Retrieved 16 November 2026.

Mini specification sheet

Power Consumption Average: 25-40W

Input Rating 12-48V 60W

USB PD Requirement 100W, 20V/5A Minimum (with Starlink USB-C to Barrel Jack Cable Accessory)

Under the sheet’s separate “POWER SUPPLY” block, the included adapter’s printed line is:

Power Specifications 100-240V ~ 1.6A 50 - 60 Hz

Source: starlink.com/public-files/specification_sheet_mini.pdf. Retrieved 16 November 2026. The 100–240V line is the adapter’s AC input marking. It is not the USB PD requirement and it is not the 12-48V 60W input rating.

Mini accessories guide

The Mini USB-C cable is designed to power your Starlink Mini on-the-go via USB-C, replacing the Mini 15m Power Cable from the Starlink Mini Kit. Requires a 100W (20V/5A) power source.

The same guide describes the Mini Car Adapter as a different path: it “can be used with any standard automotive 12-24V auxiliary power outlet, commonly referred to as the car cigarette lighter.”

Source: starlink.com/public-files/accessories_guide_mini.pdf. Retrieved 16 November 2026.

The Mini X specification sheet, a related kit, prints the same USB line: “100W, 20V/5A Minimum (with Starlink USB-C to Barrel Jack Cable Accessory),” with “Average: 25-40W” and “12-48V 60W Max.” Source: specification_sheet_mini_x.pdf. Retrieved 16 November 2026.

What a 65W charger means, using only these sources

On Starlink’s official USB-C path, 65W is an example inside a larger rule. The Help Center does not stop at 65W. It says Mini will not run on a USB Power Delivery supply rated below 100W, and then names both a 65W supply and any supply from 66W to 99W. A charger whose USB-PD rating is 65W misses that minimum. So does a 90W USB-PD charger. The practical instruction in that article is to use a source rated 100W, 20V at 5A.

That rule is about the source rating for the official cable. It is not a restatement of average consumption. The specification sheet still lists average power consumption as 25-40W and the input rating as 12-48V 60W. Those lines sit next to the USB PD requirement. They do not lower it.

Eazuse uses 65W in a different place. On the guide updated 16 October 2026, the listed minimum for the Eazuse cable is “20V/3.25A, or 65W,” with an upper line of “20V/5A, or 100W.” The same guide says, “For the most reliable results, EAZUSE recommends a compatible 100W USB-C PD power source.” Its product spec table, read 16 November 2026, prints “Min. Output Power 65W (20V/3.25A)” and “Max. Output Power 100W (20V/5A).” The product FAQ says the cable requires a PD source that can provide at least 65W (20V/3.25A), and that a 100W (20V/5A) charger or power bank is recommended for the most reliable operation. The guide’s own question “Can any 65W USB-C charger power Starlink Mini?” is answered “Not necessarily,” because the source has to support the PD profile the cable expects.

On the Eazuse pages, 20V/3.25A is the electrical meaning of the 65W minimum they print: that is the output pair in the spec table. Starlink’s official pair, on the specification sheet and the cable article, is 20V/5A at 100W. The two pairs are not the same requirement.

Daierswitches, read 16 November 2026, publishes a similar table for its own cable and states “The Starlink Mini requires at least 65W (20V/3.25A) for proper operation.” The page also says the cable supports up to 100W (20V/5A) and does not adjust voltage. No publication date is printed on that page, so the date here is the retrieval date only. The sentence attributes a 65W minimum to Starlink Mini. Starlink’s own sheet and Help Center, read the same day, attribute a 100W, 20V/5A minimum to the official USB-C cable and say supplies below 100W will not run Mini.

Read together, a 65W figure on those accessory pages is the seller’s minimum for that cable. It is not the minimum on the Starlink Mini specification sheet. Starlink’s supported-sources article adds a boundary around all of this: performance is guaranteed with the included power supply and cable, and the other power options it names are the official USB-C cable on a 100W USB-C supply, or the Mini Car Adapter.

The official paths, without mixing the numbers

Included supply and DC cable

The supported-sources article says this is the combination Starlink guarantees. The dish input rating is 12 to 48 V DC, 60 W. The included adapter’s AC marking is 100-240V ~ 1.6A 50-60 Hz. The sheet does not print a USB-C wattage for that adapter.

Official USB-C cable

5 m (16.4 ft). Requires a 100W (20V/5A) source. Help Center: 100W is the minimum, and a supply rated below 100W will not run Mini. The cable is for powering Mini. It is not for charging phones, and it is not compatible with Router 3.

Mini Car Adapter

The accessories guide says the adapter powers Mini from a standard 12-24V auxiliary outlet and is sold with the Mini USB-C cable. The supported-sources article lists it beside the 100W USB-C option.

Average draw

25-40W on the Mini specification sheet. Use it for energy planning. Do not substitute it for the 100W USB-C source rating.

Embed the existing runtime widget

Runtime still depends on watt-hours and the path you actually use. The atlas already publishes a zero-dependency calculator at /embed/. The frame below is that same widget.

Copy this snippet to place the same widget on another page:

<iframe src="https://minipoweratlas.com/embed/" title="Starlink Mini battery runtime widget" width="640" height="640" style="max-width:100%;border:0"></iframe>

Source list

  1. Starlink, “MINI SPECIFICATIONS,” specification_sheet_mini.pdf. Retrieved 16 November 2026.
  2. Starlink Help Center, “What USB power rating do I need to power my Starlink Mini?” article fba85643-e7fa-4b55-21e5-021422d5701e. Retrieved 16 November 2026. German text of the same article: de-lu.
  3. Starlink Help Center, “Starlink Mini - USB-C Cable,” article 7c9fb509-e3c4-c6af-b2f5-ef95e645c046. Retrieved 16 November 2026.
  4. Starlink Help Center, “What are the supported power sources on Starlink Mini?” article 0b2d5227-1db6-0002-ecee-f49d3b516b49. Retrieved 16 November 2026.
  5. Starlink, “MINI ACCESSORIES,” accessories_guide_mini.pdf. Retrieved 16 November 2026.
  6. Starlink, “MINI X SPECIFICATIONS,” specification_sheet_mini_x.pdf. Retrieved 16 November 2026.
  7. Eazuse, “Can You Power Starlink Mini with a USB-C Power Bank?” Updated 16 October 2026. eazuse.com/blogs/news/power-starlink-mini-with-usb-c-power-bank. Retrieved 16 November 2026.
  8. Eazuse, “USB-C to DC Cable for Starlink Mini, LED Power Indicator,” spec table and FAQ. product page. Retrieved 16 November 2026.
  9. Daierswitches, “Starlink Mini USB-C to DC Cable with Power Indicator Light - 9.84FT/3M.” product page. Retrieved 16 November 2026. No publication date on the page.

Questions this page answers

What power does Starlink Mini officially need?

For the official USB-C to barrel jack cable, Starlink requires a USB Power Delivery source rated 100 W, 20 V at 5 A. The Mini specification sheet prints “USB PD Requirement 100W, 20V/5A Minimum (with Starlink USB-C to Barrel Jack Cable Accessory).” The dish input rating on the same sheet is 12-48V 60W, and average power consumption is 25-40W. Those are separate figures.

Will a 65W USB-C charger run Starlink Mini?

Not according to Starlink’s Help Center, retrieved 16 November 2026. The article says Mini will not run on a USB Power Delivery supply rated below 100 W, and it names a 65 W supply and any supply from 66 W to 99 W. That statement covers the official USB-C path.

Why do some cable pages list 65W as the minimum?

Eazuse, updated 16 October 2026, prints 20V/3.25A, or 65W, as the listed minimum for its own USB-C-to-DC cable, and still recommends a 100W source. Daierswitches, retrieved 16 November 2026 with no publication date on the page, says its cable’s Starlink Mini requirement is at least 65W (20V/3.25A). Those lines describe the sellers’ cables. They are not the Starlink specification sheet.

Is the 25-40W average the supply you have to buy?

No. The specification sheet lists average power consumption as 25-40W and the input rating as 12-48V 60W. The USB PD requirement on that sheet, and the Help Center article, set the official USB-C source at 100W, 20V/5A minimum. Average draw does not replace the source rating.